Trends and Development of Occupational Competency Assessment and Certification in Addis Ababa: Implications for TVET-Industry Partnership
Abstract
This study aimed to assess the Ethiopian Occupational Competence Assessment and Certification Center (OCACC), considering its mandate to improve the competency level of graduates. A descriptive survey design with a qualitative method was employed. Interview held with leaders and experts of OCACC. Then, interviews were transcribed for analysis, supplemented with field notes and documents. The study investigated occupational standard (OS) perspectives, training standard (TS), and readiness of graduates. The findings showed that a graduate's school-to-work transition (SWT) is constrained by school (supply) and out-of-school (demand) factors. Gaps were observed because of inadequate attention to cooperative training and due to the industry's low awareness and frustration during the CoC assessment. Also, there was a scarcity of experts who developed and validated assessment tools at OCACC. Regarding opportunities, a strategy and participatory system exist. Finally, policy options were forwarded to fill the gap between the existing state and what OCAC strives to be in digitalization, competency development, and TVET-industry partnership.
Downloads
References
Ashebir, T., Solomon, A., & Getachew, H. (2026). Alignment of TVET occupational competency assessment practices with strategic goals in Ethiopia. International Journal of Training Research, 24 (1).
Atakilt, H., Worku, N., & Melesse, A. (2016). Evaluating the implementations of competence-based assessment and certification systems in TVET: The case of Ethiopia. Research on Humanities and Social Sciences, 6(9), 109-122. ISSN (Online)2225-0484.
Azimov, E. G., & Shchukin, A. N. (2009). New dictionary of methodological terms and concepts (the theory & practice of language teaching. Publishing House: ICAR.
Biemans, H., Wesselink, R., Gulikers, J., Schaafsma, S., Verstegen, J. & Mulder, M. (2009). Towards competence- Based VET: dealing with the pitfalls. Journal of Vocational Education & Training, 61, 267-286.
Cedefop (2015). Ensuring the quality of certification in vocational education and training. Luxembourg Publications Office. Cedefop research paper; No 51. http://dx.doi.org/10.2801/25991
CSA (2007). Population and Housing Census Report of Ethiopia - 2007. Addis Ababa: CSA.
Dewey, J. (1916). Democracy of education: An introduction to the philosophy of education. The Free Press.
EU (2011). Developing and verifying occupational standards. Pristina: PEM GmbH.
FDRE (2016). TVET Proclamation No. 954/2016. Addis Ababa: Federal Democratic Republic of Ethiopia (FDRE).
FTA (2014). Occupational competency assessment and certification directive (unpublished). Federal TVET Agency (FTA).
FTA (2016). Annual and quarterly reports (unpublished), Federal TVET Agency (FTA).
Fretwell, D. H., Lewis, M. V., & Deij, A. (2001). A Framework for defining & assessing occupational & training standards in developing countries. Information Series, No. 386, WB/ETF/OHU. https://unevoc.unesco.org/e-forum/A_Framework_for_Defining_Training_Standards.pdf
Getachew, T. (2014). An Assessment of Occupational Competence and certification system of Technical and Vocational Education and Training in selected Government institutions of Addis Ababa City Administration.
Habte, T. (2015). Implementation of occupational assessment and certification program in City Government of Addis Ababa: Success and Challenges. Unpublished Thesis, AAU.
ICDR (2000). Trainers’ guide, conventional versus modular vocational training (Unpublished). MoE/ICDR.
Makulova, A. T., Alimzhanova, G. M., Bekturganova, Z. M., Umirzakova, Z. A., Makulova, L. T., & Karymbayeva, K. M. (2015). Theory and practice of the competency-based approach in education. International Education Studies, 8(8), 183-192. DOI: 10.5539/ies.v8n8p183
MacKenzie, J. and Polvere, R-A. (2009). TVET Glossary: Some Key Terms. In International Handbook of Education for the Changing World of Work, edited by Rupert Maclean and David Wilson, 59–76. Dordrecht: Springer. https://doi.org/10.1007/978-1-4020-5281-1_4.
Mansfield, B., & Schmidt, H. (1999). Translating occupational standards into training standards (Unpublished Paper).
Martin, M. (2007). Introduction to the special issue on competence, the essence and use of the concept. European Journal of Vocational Training, 40(5), 5-22.
MoE (2008). National Technical and Vocational Education and Training (TVET) Strategy. Federal Democratic Republic of Ethiopia, Ministry of Education (MoE).
MoE (2010c). Occupational assessment and certification directive. Federal Democratic Republic of Ministry of Education (MoE).
Mulder, M. (2017). Competence theory and research: A synthesis. In: Mulder. M. (Ed.), competence-based vocational and professional education. Bridging the worlds of work and education. Cham, Switzerland: Springer, pp. 1071 – 1106.
OCAAC (2012). Dominant factors affecting candidates' occupational competency in Addis Ababa City Administration. OCAAC.
OECD (2024), Agile Occupational and Training Standards for Responsive Skills Policies, Getting Skills Right, OECD Publishing, Paris, https://doi.org/10.1787/bacb5e4a-en.
Rorty, R. (1991). Objectivity, relativism, and truth: Philosophical papers Vol. 1. Cambridge University Press.
Rüschoff, B. (2022). Methods of competence assessment in vocational education and training (VET) in Germany - A systematic review: Conducted on behalf of the Federal Ministry of Education and Research (BIBB), Discussion Paper, No. 237, ISBN 978-3-96208-324-3, Bonn: BIBB, https://nbn-resolving.de/urn:nbn:de:0035-0971-1
Selamawit, N. (2014). Factors affecting occupational competence among the health sector candidates in Addis Ababa. Unpublished Thesis, Addis Ababa University.
Stan, L., & Jolanta, R. (2016). ‘Competence’ and occupational standards: observations from six European Countries.
Copyright (c) 2026 Yekunoamlak Alemu
This work is licensed under a Creative Commons Attribution 4.0 International License.
Author (s) should affirm that the material has not been published previously. It has not been submitted and it is not under consideration by any other journal. At the same time author (s) need to execute a publication permission agreement to assume the responsibility of the submitted content and any omissions and errors therein. After submission of a revised paper in the light of suggestions of the reviewers, editorial team edits and formats manuscripts to bring uniformity and standardization in published material.
This work will be licensed under Creative Commons Attribution 4.0 International (CC BY 4.0) and under condition of the license, users are free to read, copy, remix, transform, redistribute, download, print, search or link to the full texts of articles and even build upon their work as long as they credit the author for the original work. Moreover, as per journal policy author (s) hold and retain copyrights without any restrictions.
